When a fire broke out at the manufacturing facility of a metal finishing company in Houston, Texas, the company sustained moderate damage as a result. According to a fire department official, however, the outcome could have been much worse without PVC building panels. Had it not been for the fact that two years prior the company replaced the metal panels on the sides and roof of their building with Phase-2 PVC building panels, the company
BACKGROUND: Corrugated Building Siding needs to be installed on a building, along several wall orientations and elevations. Materials of construction were reduced to two considerations, Phase-2 PVC panels and FRP. Both materials exhibited similar resistance to corrosion while maintaining a toughness to physical and environmental abuse. PVC, was, however, considered to be a safety concern that it would become brittle, such that it would shatter or break apart easily under extreme cold conditions. WHAT’S AT STAKE?:
Explosion at a southern fertilizer plant requires several hundred Phase-2 PVC and Unitrex Polycarbonate Corrugated Panels within 72 hours A southern fertilizer plant had an explosion and several hundred Phase-2 PVC Panels and Unitrex Polycarbonate Corrugated Panels were needed within 72 hours after an order was placed. Upon receipt of the confirming purchase order, all of the material required on the purchase order was cut and shipped within 24 hours. Our traffic department was able
116 Railroad Drive Ivyland, Pennsylvania 18974
Toll Free: 800-474-2732
Phone: 215-355-0250
Fax: 215-355-4066
Copyright © 2024 hfmfgcorp.com
Website Design By IQnection – A Digital Marketing Company
Copyright © 2023 hfmfgcorp.com Website Design By IQnection – A Digital Marketing Company